[bug] particle adapter tiling issue (Staff: By design)

The Particle Adapter appears to not be working correctly in this filter, which has 4 Bomber+ components. This is on Mac OSX 10.11.6, FF 6.003 beta. I was about to add the PA to the filter when I noticed this:

+1. Here is same filter with the PA added. Leave Portrait/Landscape unchecked to see the results with the PA. You can look at the presets to see what has happened. Also note that if you check the Portrait/Landscape checkbox, the filter works correctly for square and non-square images, but then the filter can not be released because Bomber+ requires the PA if images are used.

Many Circles PA 2.ffxml

My apologies for not being clear. I'll try to state what may be a philosophical discussion...

It is difficult to program with Bomber+ when it comes to 2 things: Lowering Size, pixels & non-square images.

1) The Bomber+ component disqualifies the filter from being submitable if Images are input into the particle inputs without a Particle Adapter. This means that the first 9 presets have to be at the maximum Size, pixels (or Size, pixels must be disabled). Otherwise the Image is tiled, which is not desired in the filter.

The way around this is to have Size, pixels at the max for the first nine presets (or disable it). But then I can not illustrate some functions of the filter. Also I must now have a particle size component added to the filter since Size, pixels must be at the max to work properly with the PA.

The same issue occurs with non-square images. If they are put through the PA into Bomber+, tiling occurs. This is not as critical since none of the built-in images are non-square.

Am I making sense?